#include <ConfigurationObjects.h>

Inherits AppConfigurationObjects::ConfigurationObjectBase.

Public Types
enum	Type_t { gtUnknown = 0 , gtAudio = 1 , gtPresence = 2 , gtRaw = 3 }
	Enum describing the group types. More...

enum	BridgingOpMode_t { bomRaw = 0 , bomPayloadTransformation = 1 , bomAnonymousMixing = 2 , bomLanguageTranslation = 3 }
	Enum describing bridging operation mode types where applicable. More...

enum	InboundAliasGenerationPolicy_t { iagpAnonymousAlias = 0 , iagpSsrcInHex = 1 }
	Enum describing the alias generation policy. More...

Public Member Functions
void	clear ()

Public Member Functions inherited from AppConfigurationObjects::ConfigurationObjectBase
virtual void	initForDocumenting ()

virtual std::string	toString ()

virtual bool	isDocumenting () const

Public Attributes
Type_t	type
	Specifies the group type (see Type_t).

BridgingOpMode_t	bom
	Specifies the bridging operation mode if applicable (see BridgingOpMode_t).

std::string	id
	Unique identity for the group.

std::string	name
	The human readable name for the group.

std::string	spokenName
	The group name as spoken - typically by a text-to-speech system

std::string	interfaceName
	The name of the network interface to use for multicasting for this group. If not provided, the Engine's default multicast NIC is used.

NetworkAddress	rx
	The network address for receiving network traffic on.

NetworkAddress	tx
	The network address for transmitting network traffic to.

NetworkTxOptions	txOptions
	Transmit options for the group (see NetworkTxOptions).

TxAudio	txAudio
	Audio transmit options such as codec, framing size etc (see TxAudio).

Presence	presence
	Presence configuration (see Presence).

std::string	cryptoPassword
	Password to be used for encryption. Note that this is not the encryption key but, rather, the hexidecimal representation of the baseline material to be used in a PBFDK2 algorithm for key derivation.

bool	lbCrypto
	[Optional, Default: false] Use low-bandwidth crypto

std::vector< Rallypoint >	rallypoints
	[DEPRECATED] List of Rallypoint (s) the Group should use to connect to a Rallypoint router. Use RallypointCluster instead.

RallypointCluster	rallypointCluster
	Cluster of one or more Rallypoints the group may use.

Audio	audio
	Sets audio properties like which audio device to use, audio gain etc (see Audio).

GroupTimeline	timeline
	Audio timeline is configuration.

std::string	alias
	User alias to transmit as part of the realtime audio stream when using the engageBeginGroupTx API.

bool	blockAdvertising
	[Optional, Default: false] Set this to true if you do not want the Engine to advertise this Group on the Presence group.

std::string	source
	[Optional, Default: null] Indicates the source of this configuration - e.g. from the application or discovered via Magellan

int	maxRxSecs
	[Optional, Default: 0] Maximum number of seconds the Engine will receive for on this group.

bool	enableMulticastFailover
	[Optional, Default: false] Set this to true to enable failover to multicast operation if a Rallypoint connection cannot be established.

int	multicastFailoverSecs
	[Optional, Default: 10] Specifies the number fo seconds to wait after Rallypoint connection failure to switch to multicast operation.

NetworkAddress	rtcpPresenceRx
	The network address for receiving RTCP presencing packets.

std::vector< std::string >	presenceGroupAffinities
	List of presence group IDs with which this group has an affinity.

bool	disablePacketEvents
	[Optional, Default: false] Disable packet events.

int	rfc4733RtpPayloadId
	[Optional, Default: 0] The RTP payload ID by which to identify (RX and TX) payloads encoded according to RFC 4733 (RFC 2833).

std::vector< RtpPayloadTypeTranslation >	inboundRtpPayloadTypeTranslations
	[Optional] A vector of translations from external entity RTP payload types to those used by Engage

GroupPriorityTranslation	priorityTranslation
	[Optional] Describe how traffic for this group on a different addressing scheme translates to priority for the group

int	stickyTidHangSecs
	[Optional, Default: 10] The number of seconds after which "sticky" transmission IDs expire.

std::string	anonymousAlias
	[Optional] Alias to use for inbound streams that do not have an alias component

GroupAppTransport	appTransport
	[Optional] Settings necessary if the group is transported via an application-supplied custom transport

bool	allowLoopback
	[Optional, Default: false] Allows for processing of looped back packets - primarily meant for debugging

RtpProfile	rtpProfile
	[Optional] RTP profile the group

RangerPackets	rangerPackets
	[Optional] Ranger packet options

bool	_wasDeserialized_rtpProfile
	[Internal - not serialized

TransportImpairment	txImpairment
	[Optional] The TX impairment to apply

TransportImpairment	rxImpairment
	[Optional] The RX impairment to apply

std::vector< uint16_t >	specializerAffinities
	List of specializer IDs that the local node has an affinity for/member of.

uint32_t	securityLevel
	[Optional, Default: 0] The security classification level of the group.

std::vector< Source >	ignoreSources
	[Optional] List of sources to ignore for this group

std::string	languageCode
	ISO 639-2 language code for the group

std::string	synVoice
	Name of the synthesis voice to use for the group

PacketCapturer	rxCapture
	Details for capture of received packets

PacketCapturer	txCapture
	Details for capture of transmitted packets

uint16_t	blobRtpPayloadType
	[Optional, Default: ENGAGE_DEFAULT_BLOB_RTP_PAYLOAD_TYPE] The RTP payload type to be used for blobs sent over RTP (see BlobInfo)

InboundAliasGenerationPolicy_t	inboundAliasGenerationPolicy
	[Optional, Default: iagpAnonymousAlias]

AudioGate	gateIn
	[Optional] Inbound gating of audio - only audio allowed through by the gate will be processed

bool	ignoreAudioTraffic
	[Optional, Default: false] Indicates that the group should ignore traffic that is audio-related

Public Attributes inherited from AppConfigurationObjects::ConfigurationObjectBase
nlohmann::json	_attached

Additional Inherited Members
Protected Attributes inherited from AppConfigurationObjects::ConfigurationObjectBase
bool	_documenting

Detailed Description

Group Configuration.

This describes all the group properties for all supported group types

Example:

{
   "alias": "",
   "audio": {
      "inputGain": 0,
      "inputId": 0,
      "outputId": 0,
      "outputLevelLeft": 100,
      "outputLevelRight": 100
   },
   "blockAdvertising": false,
   "cryptoPassword": "",
   "id": "",
   "interfaceName": "",
   "name": "",
   "presence": {
      "forceOnAudioTransmit": false,
      "format": 0,
      "intervalSecs": 30,
      "listenOnly": false
   },
   "rallypoints": [],
   "rx": {
      "address": "",
      "port": 0
   },
   "timeline": {
      "enabled": true,
      "maxAudioTimeMs": 30000
   },
   "tx": {
      "address": "",
      "port": 0
   },
   "txAudio": {
      "debug": false,
      "encoder": 0,
      "extensionSendInterval": 10,
      "fdx": false,
      "framingMs": 60,
      "initialHeaderBurst": 5,
      "maxTxSecs": 0,
      "maxRxSecs": 0,
      "noHdrExt": false,
      "trailingHeaderBurst": 5,
      "userTxFlags": 0,
      "userTxPriority": 0
   },
   "txOptions": {
      "priority": 4,
      "ttl": 128
   },
   "type": 0
}

See also: engageCreateGroup

Definition at line 4657 of file ConfigurationObjects.h.

Member Enumeration Documentation

◆ BridgingOpMode_t

enum AppConfigurationObjects::Group::BridgingOpMode_t

Enum describing bridging operation mode types where applicable.

Enumerator
bomRaw	Raw mode (default) - packet payloads are not accessed or modified and forwarded as raw packets.
bomPayloadTransformation	Audio payloads are transformed, headers are preserved, multiple parallel output streams are possible/expected.
bomAnonymousMixing	Audio payloads are mixed - output is anonymous (i.e. no metadata) if if the target group(s) allow header extensions.
bomLanguageTranslation	The bridge performs language translations between groups.

Definition at line 4681 of file ConfigurationObjects.h.

◆ InboundAliasGenerationPolicy_t

enum AppConfigurationObjects::Group::InboundAliasGenerationPolicy_t

Enum describing the alias generation policy.

Enumerator
iagpAnonymousAlias	Use the anonymousAlias if present.
iagpSsrcInHex	Generate hex representation of SSRC.

Definition at line 4697 of file ConfigurationObjects.h.

◆ Type_t

enum AppConfigurationObjects::Group::Type_t

Enum describing the group types.

Enumerator
gtUnknown	Unknown group type.
gtAudio	Audio group type. This group is used to transmit Audio.
gtPresence	Presence group type. This group is use to relay presence data to all nodes that are configured for the same presence group.
gtRaw	Raw group type. No special processing is performed on raw groups - the payload is siomply seen as a binary object to be typically handled by the application logic.

Definition at line 4664 of file ConfigurationObjects.h.

Constructor & Destructor Documentation

◆ Group()

AppConfigurationObjects::Group::Group ( )

inline

Definition at line 4868 of file ConfigurationObjects.h.

Member Function Documentation

◆ clear()

void AppConfigurationObjects::Group::clear ( )

inline

Definition at line 4873 of file ConfigurationObjects.h.

Member Data Documentation

◆ _wasDeserialized_rtpProfile

bool AppConfigurationObjects::Group::_wasDeserialized_rtpProfile

[Internal - not serialized

Definition at line 4827 of file ConfigurationObjects.h.

◆ alias

std::string AppConfigurationObjects::Group::alias

User alias to transmit as part of the realtime audio stream when using the engageBeginGroupTx API.

Definition at line 4769 of file ConfigurationObjects.h.

◆ allowLoopback

bool AppConfigurationObjects::Group::allowLoopback

[Optional, Default: false] Allows for processing of looped back packets - primarily meant for debugging

Definition at line 4818 of file ConfigurationObjects.h.

◆ anonymousAlias

std::string AppConfigurationObjects::Group::anonymousAlias

[Optional] Alias to use for inbound streams that do not have an alias component

Definition at line 4812 of file ConfigurationObjects.h.

◆ appTransport

GroupAppTransport AppConfigurationObjects::Group::appTransport

[Optional] Settings necessary if the group is transported via an application-supplied custom transport

Definition at line 4815 of file ConfigurationObjects.h.

◆ audio

Audio AppConfigurationObjects::Group::audio

Sets audio properties like which audio device to use, audio gain etc (see Audio).

Definition at line 4757 of file ConfigurationObjects.h.

◆ blobRtpPayloadType

uint16_t AppConfigurationObjects::Group::blobRtpPayloadType

[Optional, Default: ENGAGE_DEFAULT_BLOB_RTP_PAYLOAD_TYPE] The RTP payload type to be used for blobs sent over RTP (see BlobInfo)

Definition at line 4857 of file ConfigurationObjects.h.

◆ blockAdvertising

bool AppConfigurationObjects::Group::blockAdvertising

[Optional, Default: false] Set this to true if you do not want the Engine to advertise this Group on the Presence group.

Definition at line 4772 of file ConfigurationObjects.h.

◆ bom

BridgingOpMode_t AppConfigurationObjects::Group::bom

Specifies the bridging operation mode if applicable (see BridgingOpMode_t).

Definition at line 4710 of file ConfigurationObjects.h.

◆ cryptoPassword

std::string AppConfigurationObjects::Group::cryptoPassword

Password to be used for encryption. Note that this is not the encryption key but, rather, the hexidecimal representation of the baseline material to be used in a PBFDK2 algorithm for key derivation.

Definition at line 4745 of file ConfigurationObjects.h.

◆ disablePacketEvents

bool AppConfigurationObjects::Group::disablePacketEvents

[Optional, Default: false] Disable packet events.

Definition at line 4797 of file ConfigurationObjects.h.

◆ enableMulticastFailover

bool AppConfigurationObjects::Group::enableMulticastFailover

[Optional, Default: false] Set this to true to enable failover to multicast operation if a Rallypoint connection cannot be established.

Definition at line 4785 of file ConfigurationObjects.h.

◆ gateIn

AudioGate AppConfigurationObjects::Group::gateIn

[Optional] Inbound gating of audio - only audio allowed through by the gate will be processed

Definition at line 4863 of file ConfigurationObjects.h.

◆ id

std::string AppConfigurationObjects::Group::id

Unique identity for the group.

NOTE: Groups configured with the same multicast addresses but with different id's will NOT be routed correctly via RallyPoints as they are considered different streams.

Definition at line 4718 of file ConfigurationObjects.h.

◆ ignoreAudioTraffic

bool AppConfigurationObjects::Group::ignoreAudioTraffic

[Optional, Default: false] Indicates that the group should ignore traffic that is audio-related

Definition at line 4866 of file ConfigurationObjects.h.

◆ ignoreSources

std::vector<Source> AppConfigurationObjects::Group::ignoreSources

[Optional] List of sources to ignore for this group

Definition at line 4842 of file ConfigurationObjects.h.

◆ inboundAliasGenerationPolicy

InboundAliasGenerationPolicy_t AppConfigurationObjects::Group::inboundAliasGenerationPolicy

[Optional, Default: iagpAnonymousAlias]

Definition at line 4860 of file ConfigurationObjects.h.

◆ inboundRtpPayloadTypeTranslations

std::vector<RtpPayloadTypeTranslation> AppConfigurationObjects::Group::inboundRtpPayloadTypeTranslations

[Optional] A vector of translations from external entity RTP payload types to those used by Engage

Definition at line 4803 of file ConfigurationObjects.h.

◆ interfaceName

std::string AppConfigurationObjects::Group::interfaceName

The name of the network interface to use for multicasting for this group. If not provided, the Engine's default multicast NIC is used.

Definition at line 4727 of file ConfigurationObjects.h.

◆ languageCode

std::string AppConfigurationObjects::Group::languageCode

ISO 639-2 language code for the group

Definition at line 4845 of file ConfigurationObjects.h.

◆ lbCrypto

bool AppConfigurationObjects::Group::lbCrypto

[Optional, Default: false] Use low-bandwidth crypto

Definition at line 4748 of file ConfigurationObjects.h.

◆ maxRxSecs

int AppConfigurationObjects::Group::maxRxSecs

[Optional, Default: 0] Maximum number of seconds the Engine will receive for on this group.

When the time limit is exceeded, the Engine will fire a PFN_ENGAGE_GROUP_MAX_RX_TIME_EXCEEDED event.

Definition at line 4782 of file ConfigurationObjects.h.

◆ multicastFailoverSecs

int AppConfigurationObjects::Group::multicastFailoverSecs

[Optional, Default: 10] Specifies the number fo seconds to wait after Rallypoint connection failure to switch to multicast operation.

Definition at line 4788 of file ConfigurationObjects.h.

◆ name

std::string AppConfigurationObjects::Group::name

The human readable name for the group.

Definition at line 4721 of file ConfigurationObjects.h.

◆ presence

Presence AppConfigurationObjects::Group::presence

Presence configuration (see Presence).

Definition at line 4742 of file ConfigurationObjects.h.

◆ presenceGroupAffinities

std::vector<std::string> AppConfigurationObjects::Group::presenceGroupAffinities

List of presence group IDs with which this group has an affinity.

Definition at line 4794 of file ConfigurationObjects.h.

◆ priorityTranslation

GroupPriorityTranslation AppConfigurationObjects::Group::priorityTranslation

[Optional] Describe how traffic for this group on a different addressing scheme translates to priority for the group

Definition at line 4806 of file ConfigurationObjects.h.

◆ rallypointCluster

RallypointCluster AppConfigurationObjects::Group::rallypointCluster

Cluster of one or more Rallypoints the group may use.

Definition at line 4754 of file ConfigurationObjects.h.

◆ rallypoints

std::vector<Rallypoint> AppConfigurationObjects::Group::rallypoints

[DEPRECATED] List of Rallypoint (s) the Group should use to connect to a Rallypoint router. Use RallypointCluster instead.

Definition at line 4751 of file ConfigurationObjects.h.

◆ rangerPackets

RangerPackets AppConfigurationObjects::Group::rangerPackets

[Optional] Ranger packet options

Definition at line 4824 of file ConfigurationObjects.h.

◆ rfc4733RtpPayloadId

int AppConfigurationObjects::Group::rfc4733RtpPayloadId

[Optional, Default: 0] The RTP payload ID by which to identify (RX and TX) payloads encoded according to RFC 4733 (RFC 2833).

Definition at line 4800 of file ConfigurationObjects.h.

◆ rtcpPresenceRx

NetworkAddress AppConfigurationObjects::Group::rtcpPresenceRx

The network address for receiving RTCP presencing packets.

Definition at line 4791 of file ConfigurationObjects.h.

◆ rtpProfile

RtpProfile AppConfigurationObjects::Group::rtpProfile

[Optional] RTP profile the group

Definition at line 4821 of file ConfigurationObjects.h.

◆ rx

NetworkAddress AppConfigurationObjects::Group::rx

The network address for receiving network traffic on.

Definition at line 4730 of file ConfigurationObjects.h.

◆ rxCapture

PacketCapturer AppConfigurationObjects::Group::rxCapture

Details for capture of received packets

Definition at line 4851 of file ConfigurationObjects.h.

◆ rxImpairment

TransportImpairment AppConfigurationObjects::Group::rxImpairment

[Optional] The RX impairment to apply

Definition at line 4833 of file ConfigurationObjects.h.

◆ securityLevel

uint32_t AppConfigurationObjects::Group::securityLevel

[Optional, Default: 0] The security classification level of the group.

Definition at line 4839 of file ConfigurationObjects.h.

◆ source

std::string AppConfigurationObjects::Group::source

[Optional, Default: null] Indicates the source of this configuration - e.g. from the application or discovered via Magellan

Definition at line 4775 of file ConfigurationObjects.h.

◆ specializerAffinities

std::vector<uint16_t> AppConfigurationObjects::Group::specializerAffinities

List of specializer IDs that the local node has an affinity for/member of.

Definition at line 4836 of file ConfigurationObjects.h.

◆ spokenName

std::string AppConfigurationObjects::Group::spokenName

The group name as spoken - typically by a text-to-speech system

Definition at line 4724 of file ConfigurationObjects.h.

◆ stickyTidHangSecs

int AppConfigurationObjects::Group::stickyTidHangSecs

[Optional, Default: 10] The number of seconds after which "sticky" transmission IDs expire.

Definition at line 4809 of file ConfigurationObjects.h.

◆ synVoice

std::string AppConfigurationObjects::Group::synVoice

Name of the synthesis voice to use for the group

Definition at line 4848 of file ConfigurationObjects.h.

◆ timeline

GroupTimeline AppConfigurationObjects::Group::timeline

Audio timeline is configuration.

Specifies how the Engine should record times lines. Timelines are used for instant replay and audio archival.

See also: engageQueryGroupTimeline, PFN_ENGAGE_GROUP_TIMELINE_EVENT_??? events

Definition at line 4766 of file ConfigurationObjects.h.

◆ tx

NetworkAddress AppConfigurationObjects::Group::tx

The network address for transmitting network traffic to.

Definition at line 4733 of file ConfigurationObjects.h.

◆ txAudio

TxAudio AppConfigurationObjects::Group::txAudio

Audio transmit options such as codec, framing size etc (see TxAudio).

Definition at line 4739 of file ConfigurationObjects.h.

◆ txCapture

PacketCapturer AppConfigurationObjects::Group::txCapture

Details for capture of transmitted packets

Definition at line 4854 of file ConfigurationObjects.h.

◆ txImpairment

TransportImpairment AppConfigurationObjects::Group::txImpairment

[Optional] The TX impairment to apply

Definition at line 4830 of file ConfigurationObjects.h.

◆ txOptions

NetworkTxOptions AppConfigurationObjects::Group::txOptions

Transmit options for the group (see NetworkTxOptions).

Definition at line 4736 of file ConfigurationObjects.h.

◆ type

Type_t AppConfigurationObjects::Group::type

Specifies the group type (see Type_t).

Definition at line 4707 of file ConfigurationObjects.h.

The documentation for this class was generated from the following file:

c/include/ConfigurationObjects.h

Public Types

Public Member Functions

Public Attributes

Additional Inherited Members